Stocznia Marynarki Wojennej S.A. - MarinePoland.com

Stocznia Marynarki Wojennej S.A.

Address
Śmidowicza 48
81-127 Gdynia
telephone
Telephone/Fax

Scope of activity

•Repairs, conversions, modernisation, maintenance of Navy vessels, merchant, fishers, technical and special fleet.
•Newbuildings.
•Manufacturing of special devices, articles, units and subunits, components, and spare parts.
•Services: repairs, docking, designing, subcontracting, forwarding, storage, testing, lodging, summer resort, health care
•Foreign trade of products and services.

Licences

•Shipyard is licensed to trade in naval vessels and naval equipment worldwide.
•Shipyard is licensed for weapons manufacture and trade.

Certificates

•a Certificate of Quality System Assurance PN-EN ISO 9001:2009 in the scope of: design, building and repair of naval crafts and vessels issued by Polski Rejestr Statków SA (the Polish Register of Shipping) valid untill July 9th 2012,
•a Certificate of Quality System Assurance ISO 9001:2008 in the scope of: design, building and repair of naval crafts and vessels issued by ZSJiZ (the Department of Management and Quality Systems) valid untill July 16th 2012,
•Certificate of AQAP 2110:2009 - NATO Quality Assurance Requirements for building and repair of naval crafts and vessels issued by ZSJiZ (the Department of Management and Quality Systems) valid untill July 16th 2012,
•a Certificate of Internal Control System issued by Polskie Centrum Badań i Certyfikacji S.A. (the Polish Centre for Testing and Certification S.A.) valid untill December14th 2011,
•a Certificate of the NATO Commercial and Government Entity Code (NCAGE) issued by the the National Codification Bureau,
•First Level Industrial Security Certificate up to secret classification.
•a Statement of Compliance of a Port Facility for the Naval Shipyard Gdynia S.A., issued under the provisions of Part B of the International Code for the Security of Ships and Port Facilities (ISPS Code).

Shipyard has at its disposal the following docking facilities:
1. Floating dock
- lifting capacity 8.000 t
- length overall 150 m
- internal breadth 27 m
- draught over keelblocks 8 m
- compressed air system 0.6 MPa
- storage fuel oil tanks 150 cum
- cranes 2 x 8 t
- sludge and sewage tank
- steam and firefighting system
- power supply AC - 440 V, 380 V, 220 V
DC - 220 V, 110 V, 24 V
- maximum length of lifted vessel 170 m



2. Mechanical lift dock (with 12 separate work stands)
- lifting capacity 2.500 t
- length overall 100 m
- internal breadth 22 m
- draught over keelblocks 5.0 m
- compressed air system 0.6 MPa
- cranes Up to 50 t
- sludge and sewage tank
- steam, firefighting, fresh water and acetylen / oxygen systems
- power supply AC - 440 V, 220 V 24 V
- maximum length of lifted vessel up to110 m



3. Flat panel welding line
One side welding on flux backing strip by SAW method (submerged arc) skin plate panels of thickness 3 –12 mm and length up to 10 m.
Assembly and tack welding of stiffeners (plain bulbs, angle bars, flat bars) parallel or perpendicular to plate panel contacts.

Stiffeners dimensions limits:
min. 60x5 mm, max. 340x12 mm
length: min. 1 000 mm, max 10 000 mm
spacing gap min. 300 mm
Welding of the assembled and tack-welded stiffeners to plate panel by MAG method.
Section weight and dimensions:
Maximum weight of prefabricated section 10T;
Maximum width of section 8 000 mm.
Use of magnetic clamping devices precludes prefabrication of non-magnetic material sections.




Naval Shipyard Gdynia has fully equipped wharfs with draught up to 8 m alongside and with cranes from 8 t to 25 t lifting capacity.

Shipyard's workshops and their advanced technical equipment enable to carry out the following operations:

- Sandblasting and gritblasting,
- Treatment of hull plates (pretreatment and heavy treatment),
- Gas and electric welding,
- Machining of forged steel shafts,
- Planting and grinding of flat surfaces,
- Boring of housing, bearing seats, e.t.c.,
- Treatment and construction of piping systems (bending, flange welding, repair of valves and flaps, e.t.c.),
- Construction of ventilation trunks and ducts internal diameter up to 850 mm,
- Woodworking jobs (furniture, walls and ceiling panelling) and rigging works,
- Main engine, auxiliary machinery, shaftline and rudder repairs, refits and overhauls,
- Repairs of distributing and control systems for main engines air conditioning systems, refrigerating plants, engine room telegraphs, e.t.c.,
- Repairs and refits of electric motors, measuring instruments (thermometers, tachometers, voltmeters, ammemeters, wattmeters, e.t.c.,
- Repairs of steam boilers,
- Wire communication systems repairs,
- Radio - communication devices repairs (transceivers, receivers, radiotelephones, alarm signal receivers),
- Radars, gyrocompasses, logs, radiodirection finders and echosounders repairs,
- Verification of compressed air cylinders.

CONTACT WITH US